Instructions

Fireplace instructions

  • At the time of lighting, open the damper.
  • Check that the cooker hood is not on.

Katinkultaranta, Hiekkaniemi, Golfharju, Golfpuisto:

  • Start the fireplace exhaust fan by pressing the switch on the wall next to the fireplace so that it lights up red. Deletion is on automatically for 2 hours.
  • Light a fire with a small amount of wood and then add wood gradually so that smoke does not enter the apartment from the fireplace. A few pieces of wood at a time is enough.

Use of sauna stove

Use of sauna stove

  1. Press the stove on with the 1/0 button.
  2. The display shows the set temperature, which can be changed with the - and + keys. Recommended temperature +60 °C- +80 ° C.
  3. If you want to schedule the heater to turn on later, press the Menu key while the power is on. The display shows 2.0, which means that the stove will be on for 2 hours. Press the + key for the desired time, e.g. 3.50. Now the stove starts to heat up after 3.5 hours and will be on for 2 hours. The maximum scheduling time is 18 hours.
The thermostat automatically switches off when the desired time has elapsed. However, always check that the power has been turned off. When the stove is set to heat up, the heat elsewhere in the apartment is automatically switched off. If you want to switch off the heater earlier than you have programmed it, press the 1/0 button and the heater will switch off. 1/0 button on the heater

Kiukaan 1/0-nappi

Tips for users:

  • The stove / controller can be switched off at any time with the On / Off button.
  • To scroll through the settings, press and hold the scroll key (+ or -).
  • If the setpoints in the memory (sauna temperature and time) are suitable for the user, the stove can only be switched on by pressing the On / Off button on the controller. The control panel displays the setpoints and if no key is pressed during that time, the stove will start automatically.
Stove panel Turn on the stove for about 45 minutes. before going to the sauna.
  1. Select the desired temperature on the thermostat (temperature control). Recommended +60 °C- +80 ° C.
  2. Adjust the number of hours the sauna heats up *) (numbers are hours)
  3. There is also a timer on the same scale from which you can select the number of hours after which the stove will start to heat up **)
The clock automatically switches off when the desired time has elapsed. However, always check that the power has been turned off. When the stove is set to heat up, the heat elsewhere in the apartment is automatically switched off.

Instructions for using the sauna

  • start sauna bathing; a shower may be enough
  • sit in the steam for as long as you feel comfortable
  • good sauna practice includes not disturbing other bathers with loud behaviour
  • enjoy your time and relax
  • cool your overheated skin
  • if you are healthy, you can enjoy swimming while cooling off, if it is possible
  • wash at the end of the sauna
  • enjoy a fresh drink to restore your fluid balance
  • rest, allow yourself to relax and get changed

TV-channels

The TV is tuned in, so you can only switch channels with the TV remote control.

Internet-connection

The apartment has a WLAN connection, the wireless network IDs can be found on the modem. If you have problems with wlan, turn power-off and press reset button then on again of the Inteno router. Connection should be ready when four lights of the router are on.

In case of problems, please contact the reception.

The Air source heat pump CF notification is removed via the remote control (options -> filter reset).

In the apartments of Koy Golfharju, Koy Golfpuisto, and Koy HC Villas Golfpark, there are cooling air heat pumps that are not in use during the heating season, as the apartments are connected to district heating. Maintenance will collect the remote controls for the pumps from the apartments for the duration of the heating season. The pumps are used only during the summer season to cool the apartments.